Anderson Mfg. Co. AR-15 Rifles

atd-8

ANDERSON MANUFACTURING COMPANY is a state of the art manufacturing facility with more than thirty years experience. Anderson manufactures receivers for their AR rifles in a forged option or as a machined billet. All receivers are manufactured to 100% mil-spec with hard anodized 8625 F finish, 7075-T6 Aluminum. All tolerances are held to strictest “match grade” levels.

In addition to the rigid quality controls of manufacturing, the feature that sets the Anderson AM15 Rifles apart from the masses is the proprietary RF85 treatment allowing Anderson weapon systems to operate efficiently without “Wet” lubricant. In a coefficient friction test performed by Oak Ridge National Laboratory, the reduction of friction on all steel surfaces was reduced by 85% — without traditional “wet” lubricant, hence the name RF85. An RF-85 treated weapon cycles faster and more reliably, operates at cool er temperatures, experiences significantly less wear and, without traditional “WET” lubricant, doesn’t experience failures due to excess dirt and carbon fouling in the action.

atd-10

According to the Oak Ridge Testing Report, “There are several advantages associated with friction reduction in general, two of those being heat reduction and increased component life.” Another huge advantage offered by the RF-85 Treatment is incredibly easy clean up and dramatically reduced carbon fouling.

atd-22

The RF85 TREATMENT Process has been used successfully in other industries: motor racing extending the life of racing rear end gear sets, showing less wear, less replacement, reduced oil from five or six quarts to ONE quart and lower heat build up; Metal-working cutting tool applications, increasing cutting efficiency and tool longevity; and in the Medical Industry, specifically Orthopedics, where traditional non treated cutting tools generate excess heat, leading to post-operative complications. These previous experiences and successes in high heat, rapid cyclic situations, makes the RF-85 treatment process a natural fit for the extreme duty requirements of the AR-15 Rifle. Contact email: tsteffner@atdmachineshop.com. ATDmachineshop.com.

atd-15

With the Anderson AM-15 RIFLE treated with the RF85 process, the gun never needs to be cleaned with cleaning solution – only wiped out with a moist cloth and then dry cloth. Repeat – the action of this weapon never needs to be cleaned in the traditional manner with harsh, smelly solvents and should never be oiled. Simply clean with soapy water and a nylon brush, followed by thorough drying with a clean cloth. DO NOT OIL.

atd-26

Initially the ANDERSON AM-15 will be offered in four models:

• HEAVY BARREL CARBINE – 16” 1-8” twi st barrel , optics ready picatinny rail, frontmounted low profile gas block with picatinny rail, standard handguard. Available with FORGED or BILLET receiver. Comes with 20 round and 30 round Mag-Pul magazines. 6-position adjustable stock.

• M4 CARBINE – 16” M4 barrel, optics ready picatinny rail, front mounted low profile gas block with picatinny rail. Available with FORGED or BILLET receiver. Comes with 20 round and 30 round Mag-Pul magazines. Mag-Pul MOE stock and MOE pistol Grip. Quad-rail forend.

• HEAVY BARREL TARGET – 20” 1-8” twist heavy barrel w/target crown, optics ready picatinny rail, front mounted low profile gas block with picatinny rail, floated handguard. Available with FORGED or BILLET receiver. Comes with 20 round and 30 round Mag-Pul magazines. Mag-Pul “PRS” adjustable stock. Wilson target trigger.

• HEAVY BARREL VARMINTER – Same as PREDATOR except 24” Fluted Barrel.



 

  • Jerry Jones

    I shoot one these rifles, they are the most advanced weapon I have shoot period.

  • Jon Stephenson

    These rifles are the biggest pieces of crap that I have ever put my hands on. My Colt is 12 yrs old and I have shot the crap out of it and have not repleced anything! The experiences that I have seen with these is 6 months to 1 year and the gas rings are GONE. The throat errosion on the barrels in the same time period vary from 2/10ths – 9/10ths. ABSOLUTELY UNACCEPTABLE. Don’t all high speed rifles come with a $25.00 rear site?!?!

    Just google Anderson mfg – AR15.com and you will see how the VP of sales got busted out trying to be annonymous and say that this RF85

  • Jimmy Johnson

    These rifles are a joke. $25 rear site. 6 months to 1 year of good use and gas rings are gone and throat errosion varies from 2/10ths – 9/10ths. Search them on AR15.com. They are a joke!

  • kevin heath

    I seen your zombie certified special and was wanting to know where I could purchase the zombie handgaurd that is on this ar?

  • http://www.Andersonrifles.com Tom Steffner

    Jon / Jimmy please give me a call if your having any issues with your weapon. 859-689-4085

  • Pingback: Tactical Life: RF85 A Natural Fit for the AR-15 | Anderson Rifles