Robinson Arms’ Exchangable Caliber Rifle

Accurate, reliable and caliber convertible, it’s a patrol rifle that won’t bust a budget!

presented by

robinson.gif

I have been acquainted with Robinson Armament for a number of years. Their original location was in South Salt Lake City, so a visit or two from a gun nut like me was in order. I recall a night where I was shown the ins and outs of the M96 system to include the top feed configuration. I’ve found their rifles to be consistently rugged, reliable, and of the highest quality. I eventually owned an M96 carbine for a couple years, and although it was a bit heavier than the typical M4 it was more reliable for me. So, when the opportunity came up to test an XCR I was pleased to do so. This rifle seemed to address many of the current trends in the police rifle world and at a reasonable price.

There has been a huge move in the police rifle market into some sort of gas piston or gas tappet system. Each company has their own catchy name, but essentially it is some sort of modified or hybrid of the AK-47 design. There are complete rifles and various uppers that attach to AR15/M16 lowers, and then more radical designs. They all address the drawbacks of the gas-driven bolt in the M16 design yet maintain the ergonomics that everyone seems to find so appealing.

robinson2.gifThey work better suppressed, operate more reliably when dirty and they support multiple caliber options. The downside, of course, is the price. Our department is moving to the HK416 and just paid almost $1800 for the rifle without sights, over $200 more than last year. People are paying $1500 or more for upper receivers and waiting months to get them, so the XCR falls right into that market at this point and compared to many, it is quite a bit less.

Gun Details
I was provided with a brand-new Robinson Arms XCR with the lightweight 5.56mm NATO barrel, a high-quality magazine, Midwest Industries front and rear sights and a caliber conversion kit to 7.62x39mm. The conversion kit comes with a barrel, bolt, hammer, brass deflector and one C-Mag magazine. The rifle was equipped with a folding stock. It measures 37.75 inches when extended, and 27.4 inches folded. That compares in overall length with a 16-inch barreled AR15, and is much shorter when the stock is folded. It can be safely fired with the stock in either position.

The rifle is well balanced and weighs 7.5 pounds. They have several other barrel choices to fit your application as well. It has a full-length MIL-STD-1913 standard rail on the top to accept all the latest optics and sights, and rails at 3, 6 and 9 o’clock on the fore-end for all the other gadgets you choose to attach. It comes with an easy-to-adjust gas system for various types of ammunition that also
accommodates a suppressor.

A couple of the noticeable differences are the travel of the safety, the operation of the bolt release and the charging handle placement. I will touch on these in the shooting impressions, but they are improvements. The bolt release is at the bottom of the magazine well and is ambidextrous. You push down with either hand to release the bolt. The charging handle is on the left side of the weapon with a large knob. The safety is in the same place as a typical AR but the travel is shorter. The magazine release is in the same spot as a typical AR, as well.

rob3.gif Shooting Impressions
When I picked this rifle up it had come almost directly off the assembly line. This was not used previously as a test rifle. Since this rifle was new, I put it through the required break-in period of 200 rounds. The literature seems to indicate you may have an occasional failure to feed during break-in, but I had no malfunctions at all. In fact, it did not malfunction through the entire test (in either caliber).

I discovered I really liked the Midwest Industry sights, especially the circle-hooded front sight. Having spent many years behind an MP5 I picked it up very quickly. I sighted it in and completed the break-in. During this break-in period I fired it with the stock folded and open. I fired it rapid fire, single fire and performed a number of typical rifle drills. It functioned flawlessly and ejects brass like an AK (brass is thrown, not dropped). I adjusted the gas, as directed, after 100 rounds or so to the #2 setting and still no malfunctions. This rifle was just flat-out fun to shoot.

It was very accurate with the iron sights, very controllable and very easy to maneuver. It would serve very well as a patrol rifle and with a shorter barrel (which is available) in a SWAT role. It was during this portion of the test I was able to really test the bolt release and left side bolt. I really like this change. I found my magazine changes were quite fast. I could either insert the magazine and pull down with the thumb of my left hand, or push it down with the trigger finger of my right hand. For those southpaws out there this would be really slick.

The charging handle is on the side of the gun not the rear, so manipulating it does not require you to move. That can be done with a standard AR, but it is much easier with this system. I fired about 60 rounds through the rifle using my Jet Suppressors 1.75-inch suppressor and it functioned perfectly without having to change the gas setting from #2. Just before going to the accuracy testing I also moved my L-3 EOTech Multi-Purpose Optic (MPO) from my patrol rifle to the XCR. I changed the windage a bit, but left the elevation intact, as it was pretty close.

rob2.gifI had been using Federal American Eagle for the reliability testing, so I started out with a 10-shot string at 50 yards. At this range I used the L-3 EOTech with the 3.75x optic attached. Why 50 yards? Because that’s a real distance for most police rifles. I performed all of the accuracy testing at this range. Truth is, 99 percent of the time these rifles are deployed on traffic stops and perimeters on homes. If there is an active shooter at a school, 50 yards will still be the norm for most. I have even seen officers in strictly urban environments use 25-yard zeroes. In any case, anything that changes from 50 to 100 yards is probably the shooter not the rifle.

So, the 10-shot string measured just a bit less than an inch. I am using this target to test the repeatability after the barrel change, but it was a clear indication of the rifles accuracy. I fired all of the groups using my SWAT jacket over the hood of my car as a rest. It is safe to say this gun is as accurate as these things get, especially with a lightweight barrel. It seems to parallel the results with my accurized AR in that the 55-grainers seem to be the preferred bullet weight. The bonded stuff was fine, but a bit less accurate. It fed it all with no issues including the Federal Tactical.

Caliber Conversion
I took the rifle apart and checked the action, and as expected there was little to no fouling. That is the joy of these systems with no gas in the action. I followed the instructions in the owner’s manual for the barrel swap. Even taking my time this was very simple and quick. One screw and the barrel comes out, simply swap bolts in the bolt carrier, change the brass deflector and you are good to go. With the 7.62x39mm conversion you need to change the hammer spring. Please note the small retaining pin that holds the trigger pin. Once that is removed, it slides right out and the bigger hammer spring slides right in. When I made the swap back, the whole effort took only a couple of minutes.

Shooting this rifle in this caliber was very pleasant. It shoots almost as softly as the 5.56mm caliber. An AK, especially with a folder, can beat on you after awhile, but not this rifle. It is clearly a bit heavier as the barrel is larger as well as the ammo. It is not at all heavy, but it is clearly heavier than the 5.56mm version. As I only had one magazine and it slowed me a bit, but I put about 200 rounds of Russian ammo through this rifle and it never malfunctioned. The C-Mag worked fine, I just wished I had a couple more. At the writing of this article C-Mags were back ordered. Robinson tells me they have a large order that should arrive shortly, so multiple magazines can be acquired there, and I have seen it on other sites as well. It was not only fun, it was pretty accurate. I posted a 50-yard group under the same conditions of 1.25 inches, and I did not even have to change the settings on the L-3 EOTech.

rob.gifI swapped everything back to the 5.56mm caliber and put a couple of magazines through it to make sure there was no operator error in assembly. I then repeated the 10-round string I had fired previously. It was pretty much in the same spot. To me, there was no change that could be measured and I would not feel the need to re-zero if I made a caliber change or removed the barrel to clean it. I see no need to do that, but if you so choose, that’s fine. In breaking it down at the end of the day, it is a breeze to clean. The upper easily separates from the lower, so there is no real need to remove the barrel for cleaning.

Final Notes
This rifle is an excellent choice as a patrol rifle. It is lightweight and well balanced. It is reliable, accurate, works when it is dirty and is easy to clean. The design is simple, and rugged enough to stand up to a patrol officer’s use and abuse. The fore-end is close enough to a typical AR that it will fit in most racks that already exist in a patrol car. It works well suppressed or unsuppressed and can accommodate all the tactical goodies you can afford to buy.

I really like the bolt release mechanism and it retains enough of the AR15 ergonomics to make transition and training easy. The folding stock is certainly not necessary for a patrol rifle, but you can get it if you like. It accepts the myriad of AR15 sighting systems out there and worked very well with my L-3 EOTech MPO. The barrel conversion is simple and works, although I would like to see more than one magazine manufacturer for the 7.62x39mm caliber.

Officer price on the rifle equipped as tested (minus the conversion) is about $1500, which puts it close to some of the uppers and less than many similar rifles (including some standard AR15s) making it a viable choice for a patrol rifle. The conversion kit is a bit over $500 and there are other caliber choices. You can also get a 6.8mm SPC caliber and there is a 6.5mm caliber in the works. All are simple barrel swaps that allow you to maintain the equipment you already have on the rifle. It is a great rifle that works well, is versatile and is priced competitively for officers.


 

  • zac geiwitz

    sweet. especially if it works the way its said to

  • monkey

    Trust me it does!

  • http://www.acetools.com John Farrow

    It works better than described!!!! Try and find a multi-caliber system for less than 2500$, or outfit and AR with 3 calibers, in todays market the cost out of sight..Let alone the lowers won’t work with 7.62 x 39mm.. This is the way to go for anyone who wants the “WHOLE PACKAGE” !!!!

  • stargazer

    Where can i try one out ? n,c

  • marinewmu911

    I saw this rifle advertised over and over again in these magazines but had never seen any literature on it. It always advertised to be the “replacement” of the M16 (Like most other combat geared rifles today), I thus dismissed it as hype and looked very little at the weapon. However, after finally sitting down and looking up the details, I’ve been converted completely, this rifle is an amazinng piece that I will be adding to my armory ASAP in 6.5mm (when released). Only the ACR (now under Cereberus) and Massoud have my attention more than this weapon. Good to go Robinson Arms!

  • Gregory Schmitz

    The writeup very accurately describes the XCR.

    The beauy is that while not normaly needed, the ability to fold the stock allows cramped space use, or cramped vehicle storage and use like an AK47.

    The longer I own the gun, the more I am impressed with it.

  • Steve I.

    WOW!
    Finally, some forward-thinking company took all the strong points of the AK, AR, and FAL and combined them into one weapon with none of the drawbacks and all of the pluses of the “big three” weapons systems!
    I’m an FAL guy, and always wished someone would re-design the (great) left-side cocking lever to act as a forward-assist when pushed in…Robinson did it!
    The barrel-extension lockup from the AR allows a lightweight receiver, and the AK-type 3-lug bolt is simple, reliable and STRONG!
    Recently, there have been many manufacturers designing piston-driven AR-type rifles, which confirms Eugene Stoner’s design flaw of an otherwise (mostly) well-thought-out rifle. Kudos to Robinson for taking it to the next level with the FAL-type adjustable gas system and non-recip handle!
    Ditto for keeping the return spring out of the buttstock allowing for this very shooter-specific item to be changed at will.
    The quick-change barrel is an absolute winner, and the fact that zero and headspace remain constant shows that their engineers are absolutely the best in the business! This ability to change calibred uppers on the same receiver is one of the best features of the AR system, thanks for keeping our wallets in mind!
    *
    I’ve always wondered why someone in arms design never did all this before…Robinson is at the very top of their field and will be getting my money very soon.

  • Steve I.

    PS- I can’t wait for the .308 / 6.5-285 / .260 series rifles to come out!

  • Steve I.

    Hi Robinson, me again..
    I guess if there were an XCR pointed at my head and I was asked to find a drawback of this rifle it would be that for non-5.56 calibres we have to use the proprietary Robinson magazines. I hope they will offer new rifle or barrel(calibre change) buyers a substantial volume discount. Paying a buck a round for mags reminds me of 1994. I know they chose not to use standard AK mags for their 7.62×39 rifle in the interest of quick mag changes under stressful conditions, but I wonder if there might be a way to design the rifle’s mag well to accept them if they were modified by, say, grinding down the catch lips to allow AR-like insertion. This is just in the name of economics & availability, but like I said if they offered a one-time volume discount to rifle or barrel(calibre change)buyers if they buy, say 20 or more mags it would help a lot. Knowing they could always sell their extra mags would entice many more buyers to take advantage of this, and Robinson would more than make up for the loss of margin with the increase in volume, and everyone would be happy.

  • Marcus Stanton

    This carbine is one of many new 21st century platforms that are just coming to the market. The FN SCAR, HK 416, and Bushmaster/Remington ACR (if it ever sees daylight) are a few others. Among this group, the XCR doesn’t get the respect it deserves, likely due to the fact that it comes from a smaller manufacturer. It was first to the market of any of them, is around half the price of the SCAR right now and contains an outstanding array of features, reliability and flexibility.

  • HUn-boy

    Please, you need look for the HUN-ARMY main boss, or general and need show this weapon!!! Every HUN-soldiers be happy, if we change these weapon!!!
    Perfect! 3 types weapons just in the 1 weapon! These future… Thank you Robinson!!!

  • Gregory Schmitz

    Some things to add.

    New trigger is now standard “match grade”. Maybe not quite, but excellent, and vast improvement over original, and makes the standard AR triggers feel like an AK trigger.

    Also safety is improved (larger).

  • gunslinger454

    I’ve only had the opportunity to run a few rounds through an XCR on one occasion when a fellow showed up at my local range with one, but I can say without reservation that I liked it! The one I got to play with was the standard 16″ 5.56 and was topped with the ubiquitous Aimpoint. So I didn’t really get to test its level of accuracy, but overall it was a very nice carbine and shot very well.

    I am seeing in my own future one of Robinson’s ‘Mini’ XCRs with the 9″ barrel in 6.8SPC. (A standard XCR with an 11″ barrel would work too.) I’ve never been a real fan of the 6.8SPC, really preferring the 6.5 Grendel myself, but it is really well suited to short barrel carbines, far better than the 5.56/.223 anyway. (The 6.8SPC has more muzzle energy out of a 9″ barrel than the 5.56 does from a 16-20″ barrel.) I think this would not only make an excellent patrol carbine, but an excellent home defense carbine as well!

    Personally I am really hoping that Robinson brings out a model, or even just a caliber conversion, in 6.5mm Grendel. Being able to switch from an 11″ barrel with an Aimpoint for patrol/CQB to an 18″ or 20″ heavy barrel paired with a good scope–and being able to do so in a couple of minutes on the fly–could be very useful to the sniper operating in an urban environment where he first needs to clear the building he plans on using as a hide site before settling in! It would also be useful to the guy who wants a good home defense carbine that he can also use to hunt deer, pronghorns and/or predators.

  • Dan

    I currently own 4 XCR rifles: two 5.56, one each 6.8 & 7.62×39. These are fantasic rifles! The new triggeris very nice. I am anxiously awaiting the “.308″ medium rifle. Highly recommend this system.

  • BADDFROGG

    Three years later and we are still waiting for the XCR in 6.5 and the .308. Will they be available in 2011 or 2012? The wait continues…stay tuned.
    But still a nice piece of engineering and built like a tank. Kits are priced right and readily available. I still have faith in Robinson Arms. And they do need better marketing. i.e. T-shirts,cups, patches,and posters.

  • randy

    like it so much i bought one in 6.8 and 5.56 and the new stock god i love it when i change it to 5.56 i could see the ak heritage it looks like a fal in some ways and if i did not have a fal i would be getting the 308