- RELATED STORY: 3 Expert Points on What Makes a Good Bullet
“Shell Shock’s new NAS3 two-piece casings are unlike anything I’ve ever seen before and with any new technology I always want to see for myself if the manufacturer’s claims are true. Shell Shock says its cases are stronger and more reliable than brass. Well, we shot one thousand rounds today; a lot of people won’t shoot a thousand rounds in a year and we did not have a single case separation or ammunition related malfunction. From a reliability standpoint, these new casings are flawless. I give Shell Shock Technologies two thumbs way up,” Hallstrom said in a statement.
According to the press release, Shell Shock’s NAS3 cases are 50 percent lighter than brass cases. They also offer more lubricity and won’t abrade, clog, foul, wear-out or damage breach and ejector mechanisms. Not only that, NAS3 cases boast more corrosion resistance, tensile strength and elasticity than brass. They won’t split, chip, crack or stretch, and they’re fully-reloadable with S3 Reload dies.
Shell Shock’s NAS3 cases have also been tested to pressures over 70k psi. They’re cool-to-the-touch when ejected, and can be picked up with a magnet. The head can be colored for both branding purposes and so that the user can easily identify the load, the release states.
- RELATED STORY: AK Ammo – 11 Top Loads For Your Kalashnikov
“NAS3 cases are “Best in Class” for maintaining consistent velocity between rounds,” Shell Shock says. “In an independent test performed by H.P. White Laboratory (a major munitions testing facility), 9mm rounds fired using NAS3 cases achieved a velocity standard deviation of 0.93 fps (124 grain FMJ bullet, 4.2 grains Titegroup powder, 10 rounds, extreme variation 3fps).”