Jag Brushes TM, give superior dual-action capability. The Utility Patent-Pending design is a dual-action rod system that saves users time and gives them better cleaning results for less work.
The dual action is due to giving the brushes two distinct radial diameters. The larger diameter gives Jag Brushes TM the single-action capability of standard bore brushes, making them able to brush grime loose from the bore. The smaller diameter simultaneously gives Jag Brushes TM the ability to act similar to sub-caliber brushes, making them able to push patches to wipe the bore clean. However, unlike sub-caliber brushes whose diameters are arbitrarily smaller than bore diameters, the smaller diameter of Jag Brushes TM is precisely smaller by an amount close to the thickness of cotton patches. The ability of the brushes to spread the patches and to push them firmly against bore walls is maximized. In a manner better than any other jag, the Jag Brushes TM push patch fabric deeply into edges of rifling grooves, soaking up and sweeping out grime from the entirety of the grooves.
Their construction is based on the standard method, being a twisted-wire stem. The adaption to the twisted-wire stem makes them less expensive than other dual-action cleaning systems. Jag Brushes TM are much less expensive than pulled-cable dual-action systems.
The threaded connectors have standard 8-32 thread, making them compatible with standard rifle/pistol rods. A user may use a favorite rod in a toolbox to begin benefiting from Jag Brushes TM. Thus the system is a dual-action rod system.
Installing a patch onto the front of the Jag Brush TM is easy. A patch is trapped between the entry of the bore and the Jag Brush TM. The simple action of pushing the Jag Brush TM into the bore automatically wraps the patch around the front of the Jag Brush TM, the patch fabric staying attached to the bristle tips during push and pull.
The dual-action rod system requires less time and work than other dual-action systems. Pulled-cable dual-action systems do not stroke the bore, and cleaning materials must be reloaded for every pull through the bore. Jag Brushes TM avoid the long reinsertion process because they attach to standard rods, making them able to complete full strokes, forward and backward. There are other dual-action systems that attach to rods, but those systems cannot complete the backstroke with a patch because patches do not stay attached to their jags. Patches stay attached to bristle tips of Jag Brushes TM.
Jag Brushes TM with patches do not require time for reloading or reinserting the combination for each stroke, and the result makes users more likely to perform more runs through the bore for each cleaning session. A few passes of a pulled-cable dual action system leaves a lot of
grime in the bore which in turn reduces accuracy of projectiles. On the other hand, the ease of the Jag Brush TM makes a user more likely to pass the brush and wiping element through many times during one cleaning session. When a patch becomes dirty, it is easy to pull off the dirty patch, and then to install a new patch.
The Jag Brush TM can be used in single-action fashion whenever the user chooses. By not including the patch, the rear of the Jag Brush TM acts as a single-action bore brush.
For more information on Jag Brushes TM please visit www.rigelproducts.com
Jag Brushes TM, give superior dual-action capability. The Utility Patent-Pending design is a dual-action…
by Tactical-Life.com / Jan 12, 2009