Comment(s)

Stag Arms has announced the release of two new models for 2014 – the Model 3T and Model 3T-M. Scroll down to see a video showcasing these new rifles.

The Stag Arms Model 3T comes with a standard mil-spec 6 position stock, an A2 pistol grip and a 13.5″ freefloat Diamondhead VRS-T handguard. Furthermore, the Model 3T is modular, allowing for the attachment of rail sections at the 3, 6 and 9 o’clock position. The Model 3T comes with Diamondhead front and rear polymer flip-up sights.

The Stag Arms Model 3T-M also comes with a 13.5″ Diamondhead VRS-T handguard, but it also has a set of aluminum front and rear flip-up sights. Additionally, the 3T-M has a Magpul ACS 6-position buttstock and a Magpul MOE grip, each with discreet storage compartments for batteries, spare parts, bullets and more. Stag Arms offers both the Model 3T and Model 3T-M for the left and right-handed shooters.

For more about Stag Arms, visit http://www.stagarms.com.

Stag Arms Model 3T Specifications
Weight: 7.4 pounds
Length: 32.25″ collapsed, 35.75″ extended
Action: Semi-auto direct impingement
Chamber: 5.56 NATO – this rifle will also shoot .223
Twist Rate: 1/9 button rifled
Muzzle Device: A2 flash hider (Stag Arms Compensator on post ban models)
Barrel: 16″, 4140 steel, chrome lined, government profile, manganese phosphate coated
Handguard: 13.5″ Freefloat Diamondhead VRS-T handguard
Upper Receiver: Forged and mil-spec 7075 T6 aluminum with type 3 hard coat anodizing and a picatinny rail on top
Bolt Carrier: Enhanced Semi-Auto with a manganese phosphate coating
Charging Handle: Standard mil-spec
Front Sight: Polymer Diamondhead low profile front flip up sight
Rear Sight: Polymer Diamondhead low profile rear flip up sight
Lower Receiver Material: 7075 T6 aluminum with a type 3 hard coat anodizing
Hammer/Trigger pin size: Mil-spec small pin .154″
Pivot/Takedown Pin Size: Mil-spec small pin – .250″
Caliber Marking: 5.56 NATO
Buttstock: Mil-spec 6 position (Post-ban stock looks the same non-adjustable at the furthest extension)
Buffer: Standard carbine buffer and spring
Trigger: Mil-spec single stage trigger with a non-adjustable 5-8 pound trigger pull
Grip: A2 style plastic grip
Magazine: 30rd (Post-ban versions will have a 10rd magazine)
Safety Selector: Right Hand

Stag Arms Model 3T-M Specifications
Weight: 7.5 pounds
Length: 33.5″ collapsed, 37″ extended
Action: Semi-auto direct impingement
Chamber: 5.56 NATO – this rifle will also shoot .223
Twist Rate: 1/9 button rifled
Muzzle Device: A2 flash hider (Stag Arms Compensator on post ban models)
Barrel: 16″, 4140 steel, chrome lined, government profile, manganese phosphate coated
Handguard: 13.5″ Freefloat Diamondhead VRS-T handguard
Upper Receiver: Forged and mil-spec 7075 T6 aluminum with type 3 hard coat anodizing and a picatinny rail on top
Bolt Carrier: Enhanced Semi-Auto with a manganese phosphate coating
Charging Handle: Standard mil-spec
Front Sight: Aluminum Diamondhead low profile front flip up sight
Rear Sight: Aluminum Diamondhead low profile rear flip up sight
Lower Receiver Material: 7075 T6 aluminum with a type 3 hard coat anodizing
Hammer/Trigger pin size: Mil-spec small pin .154″
Pivot/Takedown Pin Size: Mil-spec small pin – .250″
Caliber Marking: 5.56 NATO
Buttstock: Magpul ACS 6-position buttstock (Post-ban stock looks like the standard carbine stock but is non-adjustable at the furthest extension)
Buffer: Standard carbine buffer and spring
Trigger: Mil-spec single stage trigger with a non-adjustable 5-8 pound trigger pull
Grip: Magpul MOE grip
Magazine: 30rd (Post-ban versions will have a 10rd magazine)
Safety Selector: Right Hand


Up Next

SHV Scope and Competition Scope from NightForce Optics – New for 2014 | VIDEO

Nightforce Optics have unveiled their highly-anticipated SHV (Shooter, Hunter, Varminter) scope, as well as their...