Mission First Tactical specializes in rifle accessories, so it only makes sense that the Pennsylvania-based company would eventually jump into the muzzle device market, and it’s doing exactly that with its new MFT Evolve Add-Ons lineup.

The MFT Evolve Add-Ons series consists of five muzzle devices: the 3-prong ported muzzle brake; 5-direction compensator; 4-prong side port muzzle brake/compensator hybrid; Tapered 3-port compensator; and 3-prong flash hider. Each model is made from 416 stainless steel and finished in black nitride for durability.

Check out the presser below to get the lowdown on each device:

Mission First Tactical 3-Prong Ported Muzzle Brake

The 3-Prong Ported Muzzle Brake (PN: E2ARMD1) has 4-ports on top reducing muzzle blast and the 2-ports on the side direct gas horizontally, keeping recoil to a minimum. The front 3-prongs help direct the remaining gas and concussion forward from the shooter. Traditional muzzle brakes direct gas in one way, horizontally, and MFT’s new 3-prong ported muzzle brake takes it in a whole new direction. A 17PH4 stainless steel pre-hardened MIL-Spec crush washer is included. MSRP: $ 34.99.

Mission First Tactical 5-Direction Compensator

MFT’s 5-Direction Compensator (PN: E2ARMD2) disperses gas in five distinct directions. It aids in a wide gas flow to limit recoil and muzzle climb. There are no bottom slots to keep the dust down during low level shooting. The slim profile of the compensator matches the contour of the M4 style AR barrel, making for a clean, sleek transition. A 17PH4 stainless steel pre-hardened MIL-Spec crush washer is included. MSRP: $ 49.99.

Mission First Tactical 4-Prong Side Port Muzzle Brake/Compensator

The new hybrid is a 4-Prong Side Port Muzzlebrake /  Compensator (PN : E2ARMD3) that is designed to be a true hybrid. Gas is forced forward and away from the shooter, as well as being disbursed out of the sides. The first chamber helps direct gas up through the ports on top, which also aids with reducing muzzle climb. The gas exiting out of the sides aids in reducing recoil. The forward 4-prongs direct the concussion and remaining gas forward and away from the shooter, making shooters on your left and right a bit happier. A 17PH4 stainless steel pre-hardened MIL-Spec crush washer is included. MSRP: $ 69.99.

Mission First Tactical Tapered 3-Port Compensator

Designed to reduce recoil and muzzle climb, the Tapered 3-Port Compensator (PN : E2ARMD4) features two angled ports on top to direct gas up and backward to aid in muzzle climb and recoil reduction. Three horizontal ports on each side direct the gas out and away, aiding in recoil reduction and adequate gas disbursements. The slim profile makes for a clean transition to the end of the barrel and is a must for custom AR builds. MSRP: $99.99.

Mission First Tactical 3-Prong Flash Hider

The final new muzzle device from Mission First Tactical is the 3-Prong Flash Hider (PN : E2ARMD5). It projects gas in the proper directions to keep the flash footprint to a minimum. It also channels a small amount of gas through a port upward to help diminish muzzle climb. The length and inside texture of the flash hider helps keep the flash signature to a minimum for most 5.56 / .223 bullet grain weights providing for a flash-less shooting experience. A 17PH4 stainless steel pre-hardened MIL-Spec crush washer is included. MSRP: $ 74.99.

Up Next

New, Lighter Marine Boots to be Tested at Parris Island This Summer

Two pairs of lighter Marine boots—the Danner Reckoning Hot Weather and Rocky Tropical—will be...