Comment(s)

bulletpuller.gif

Every reloader is eventually confronted with the problem of having to pull bullets from loaded cases either to correct an error or to modify a load using a different bullet or powder. Pulling bullets isn’t always as easy as it sounds, particularly when the only available bullet puller won’t fit the press or when the diameter of the loaded bullet won’t fit the puller.

universal-bullet-puller-cutaway_hires.gifForster Products To The Rescue! 
Forster Products’ new Universal Bullet Puller fits not only Forster’s patented Co-Ax® Press for which it was originally designed, but it will fit virtually any standard reloading press with a 7/8” x 14” thread. It makes pulling bullets much easier, quicker and safer than using a hammer style puller. To ensure true universal function, the Universal Bullet Puller uses diameter-specific Bullet Puller Collets to hold the bullet, which are available in twenty-one (21) different sizes from .17 to .458. So, almost any caliber of bullet can be held securely by simply tightening the collet screw with a 9/16” wrench. Changing calibers is as simple as changing collets.

Each Universal Bullet Puller is supplied with a modified version of Forster Products’ exclusive Cross Bolt Locking Ring which locks the puller securely into the Co-Ax press.

For a complete list of caliber-specific Bullet Puller Collets, visit www.forsterproducts.com

Up Next

KITANICA Mark IV

Every reloader is eventually confronted with the problem of having to pull bullets from loaded…