- RELATED STORY: DIY – 21 Steps For Properly Building Your Own AR
The JP Enterprises MicroFit takedown pins come in three sizes: mean, oversized and undersized for the front and rear of the receivers. According to the press release, the mean pins are match standard takedown pin sizes, while the over- and undersized variants are offset slightly over .001 from that size. The pins allow for five different fits, and the maximum loose and tight combs will change the receiver fit dramatically, the company says.
“We’ve been fighting the issue of poor receiver fit for 20 years, which is when our original Tension Pin debuted,” stated JP Enterprises founder John Paul. “Ask any bolt gun shooter. They will tell you that a rifle loose in its stock will not reach its accuracy potential. An AR with a loose upper/lower is no different. The MircoFit pins require no modification to the receiver. They simply replace your current pins.”
- RELATED STORY: AR Rifles & Pistols – 20 New Models On The Block
The MicroFit takedown pins sport a near mirror black finish with a QPQ coating. All pins feature a two-faceted punch or bullet capturing recess, allowing the user to safely apply force to the pins without running the risk of scratching the receiver. They’ll be sold as individual pins and as replacement sets. MSRP for the individual pins is $15, or $28 for the set.
For more information about JP Enterprises, visit http://www.jprifles.com.
Discussion about this post